1 - Use Antrea for NetworkPolicy

This page shows how to install and use Antrea CNI plugin on Kubernetes. For background on Project Antrea, read the Introduction to Antrea.

Before you begin

You need to have a Kubernetes cluster. Follow the kubeadm getting started guide to bootstrap one.

Deploying Antrea with kubeadm

Follow Getting Started guide to deploy Antrea for kubeadm.

What's next

Once your cluster is running, you can follow the Declare Network Policy to try out Kubernetes NetworkPolicy.

2 - Use Calico for NetworkPolicy

This page shows a couple of quick ways to create a Calico cluster on Kubernetes.

Before you begin

Decide whether you want to deploy a cloud or local cluster.

Creating a Calico cluster with Google Kubernetes Engine (GKE)

Prerequisite: gcloud.

  1. To launch a GKE cluster with Calico, include the --enable-network-policy flag.

    Syntax

    gcloud container clusters create [CLUSTER_NAME] --enable-network-policy
    

    Example

    gcloud container clusters create my-calico-cluster --enable-network-policy
    
  2. To verify the deployment, use the following command.

    kubectl get pods --namespace=kube-system
    

    The Calico pods begin with calico. Check to make sure each one has a status of Running.

Creating a local Calico cluster with kubeadm

To get a local single-host Calico cluster in fifteen minutes using kubeadm, refer to the Calico Quickstart.

What's next

Once your cluster is running, you can follow the Declare Network Policy to try out Kubernetes NetworkPolicy.

3 - Use Cilium for NetworkPolicy

This page shows how to use Cilium for NetworkPolicy.

For background on Cilium, read the Introduction to Cilium.

Before you begin

You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts. If you do not already have a cluster, you can create one by using minikube or you can use one of these Kubernetes playgrounds:

To check the version, enter kubectl version.

Deploying Cilium on Minikube for Basic Testing

To get familiar with Cilium easily you can follow the Cilium Kubernetes Getting Started Guide to perform a basic DaemonSet installation of Cilium in minikube.

To start minikube, minimal version required is >= v1.5.2, run the with the following arguments:

minikube version
minikube version: v1.5.2
minikube start --network-plugin=cni

For minikube you can install Cilium using its CLI tool. Cilium will automatically detect the cluster configuration and will install the appropriate components for a successful installation:

curl -LO https://github.com/cilium/cilium-cli/releases/latest/download/cilium-linux-amd64.tar.gz
sudo tar xzvfC cilium-linux-amd64.tar.gz /usr/local/bin
rm cilium-linux-amd64.tar.gz
cilium install
🔮 Auto-detected Kubernetes kind: minikube
✨ Running "minikube" validation checks
✅ Detected minikube version "1.20.0"
ℹ️  Cilium version not set, using default version "v1.10.0"
🔮 Auto-detected cluster name: minikube
🔮 Auto-detected IPAM mode: cluster-pool
🔮 Auto-detected datapath mode: tunnel
🔑 Generating CA...
2021/05/27 02:54:44 [INFO] generate received request
2021/05/27 02:54:44 [INFO] received CSR
2021/05/27 02:54:44 [INFO] generating key: ecdsa-256
2021/05/27 02:54:44 [INFO] encoded CSR
2021/05/27 02:54:44 [INFO] signed certificate with serial number 48713764918856674401136471229482703021230538642
🔑 Generating certificates for Hubble...
2021/05/27 02:54:44 [INFO] generate received request
2021/05/27 02:54:44 [INFO] received CSR
2021/05/27 02:54:44 [INFO] generating key: ecdsa-256
2021/05/27 02:54:44 [INFO] encoded CSR
2021/05/27 02:54:44 [INFO] signed certificate with serial number 3514109734025784310086389188421560613333279574
🚀 Creating Service accounts...
🚀 Creating Cluster roles...
🚀 Creating ConfigMap...
🚀 Creating Agent DaemonSet...
🚀 Creating Operator Deployment...
⌛ Waiting for Cilium to be installed...

The remainder of the Getting Started Guide explains how to enforce both L3/L4 (i.e., IP address + port) security policies, as well as L7 (e.g., HTTP) security policies using an example application.

Deploying Cilium for Production Use

For detailed instructions around deploying Cilium for production, see: Cilium Kubernetes Installation Guide This documentation includes detailed requirements, instructions and example production DaemonSet files.

Understanding Cilium components

Deploying a cluster with Cilium adds Pods to the kube-system namespace. To see this list of Pods run:

kubectl get pods --namespace=kube-system -l k8s-app=cilium

You'll see a list of Pods similar to this:

NAME           READY   STATUS    RESTARTS   AGE
cilium-kkdhz   1/1     Running   0          3m23s
...

A cilium Pod runs on each node in your cluster and enforces network policy on the traffic to/from Pods on that node using Linux BPF.

What's next

Once your cluster is running, you can follow the Declare Network Policy to try out Kubernetes NetworkPolicy with Cilium. Have fun, and if you have questions, contact us using the Cilium Slack Channel.

4 - Use Kube-router for NetworkPolicy

This page shows how to use Kube-router for NetworkPolicy.

Before you begin

You need to have a Kubernetes cluster running. If you do not already have a cluster, you can create one by using any of the cluster installers like Kops, Bootkube, Kubeadm etc.

Installing Kube-router addon

The Kube-router Addon comes with a Network Policy Controller that watches Kubernetes API server for any NetworkPolicy and pods updated and configures iptables rules and ipsets to allow or block traffic as directed by the policies. Please follow the trying Kube-router with cluster installers guide to install Kube-router addon.

What's next

Once you have installed the Kube-router addon, you can follow the Declare Network Policy to try out Kubernetes NetworkPolicy.

5 - Romana for NetworkPolicy

This page shows how to use Romana for NetworkPolicy.

Before you begin

Complete steps 1, 2, and 3 of the kubeadm getting started guide.

Installing Romana with kubeadm

Follow the containerized installation guide for kubeadm.

Applying network policies

To apply network policies use one of the following:

What's next

Once you have installed Romana, you can follow the Declare Network Policy to try out Kubernetes NetworkPolicy.

6 - Weave Net for NetworkPolicy

This page shows how to use Weave Net for NetworkPolicy.

Before you begin

You need to have a Kubernetes cluster. Follow the kubeadm getting started guide to bootstrap one.

Install the Weave Net addon

Follow the Integrating Kubernetes via the Addon guide.

The Weave Net addon for Kubernetes comes with a Network Policy Controller that automatically monitors Kubernetes for any NetworkPolicy annotations on all namespaces and configures iptables rules to allow or block traffic as directed by the policies.

Test the installation

Verify that the weave works.

Enter the following command:

kubectl get pods -n kube-system -o wide

The output is similar to this:

NAME                                    READY     STATUS    RESTARTS   AGE       IP              NODE
weave-net-1t1qg                         2/2       Running   0          9d        192.168.2.10    worknode3
weave-net-231d7                         2/2       Running   1          7d        10.2.0.17       worknodegpu
weave-net-7nmwt                         2/2       Running   3          9d        192.168.2.131   masternode
weave-net-pmw8w                         2/2       Running   0          9d        192.168.2.216   worknode2

Each Node has a weave Pod, and all Pods are Running and 2/2 READY. (2/2 means that each Pod has weave and weave-npc.)

What's next

Once you have installed the Weave Net addon, you can follow the Declare Network Policy to try out Kubernetes NetworkPolicy. If you have any question, contact us at #weave-community on Slack or Weave User Group.